Sym MB10A7-A series Service Manual page 174

To this chapter contents
11. Rear Wheel / Rear Suspension / Rear Brake
Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Drive chain / drive sprocket inspection
Drive chain
Inspect the drive sprocket teeth for wear or
damage.
Replace it if it is over worn out.
Caution
The drive sprocket teeth and drive chain
should be checked at the same time.
Drive chain cleaning
Check the drive chain for wear or damage.
Replace it if necessary.
Driven flange / driven sprocket removal
Final driven flange locknut
Remove the rear wheel and drive chain.
Remove the rear wheel axle locknut and final
driven flange locknut.
Remove the final driven flange and driven
sprocket.
Rear axle locknut
Make the tongued washers on the final driven
sprocket flat.
Tongued washers
11-9