Sym MB10A7-A series Service Manual page 75

To this chapter contents
4. Lubrication / Clutch / Transmission
Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Reinstall the clutch set ring.
Clutch set ring
Assemble the clutch assembly to the
Anti-loose locknut
crankshaft.
Put the anti-loose lock washer first and then
the flexible washer.
After the anti-loose locknut is installed, bend
any one location foot of the lock washer to fit
in the locknut.
Location foot
4 screws
Install the clutch outer cover (4 screws).
Clutch cam plate
Install the clutch cam plate.
Make the clutch lever aim at the breach of the
clutch cam plate and install the clutch lever
onto the gear shift spindle.
Clutch lever
4-10