Sym MB10A7-A series Service Manual page 138

9. Crankshaft / Crankcase / Shifting Gear / Kick Starter
Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Check the gear shift drum for wear or damage.
Disassemble the gears and washers on the
main shaft and counter; arrange the gears and
washers in order.
Check the teeth and grooves of the gear for
wear and damage.
Assemble the gears and washers onto the
main shaft and counter shaft by order after the
inspection is finished without anything
incorrect.
Caution
Apply clean engine oil to the gears before
assembly.
Make sure the cir clip is fully seated in the
shaft grooves after installation.
To this chapter contents
Counter shaft
Main shaft
9-9