Sym MB10A7-A series Service Manual page 156

Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Apply grease to the inner side of right dust
seal and install the dust seal to the wheel hub.
Check the dust seal inside the brake panel for
wear or damage. Replace it with new one if
necessary.
Turn the speedometer gear receiver to check
if the speedometer gear rotates fluently.
Front wheel installation
Align the raised parts of the speedometer gear
receiver with the grooves of the front wheel
hub.
Install the front brake panel.
Caution
Contaminated brake shoe will decrease
braking efficiency; therefore grease cannot
be applied to brake shoes and wheel hub.
Place the front wheel between the front
cushions.
Align the groove on the brake panel with the
raised stopper on the left front cushion.
To this chapter contents
10. Steering / Front Wheel /Front Suspension / Front Brake
Gear receiver
Grooves
Raised stopper
Dust seal
Dust seal
Raised parts
10-11