Sym MB10A7-A series Service Manual page 153

10. Steering / Front Wheel /Front Suspension / Front Brake Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Installation
Install in the reverse order.
Torque value：
Handlebar locknut
Before assembling the handle switch, throttle
grip and throttle cable, apply grease to the
sliding surface.
Align the raised point inside the handle switch
with the location hole on the steering handle
pipe.
After assembling the handle pipe set, confirm
and adjust the following：
the operation and clearance of throttle grip
the operation of electrical system and
speedometer
10-8
To this chapter contents
3.0~3.5kgf-m
Raised point
Location hole