Sym MB10A7-A series Service Manual page 198

Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Headlight bulb replacement
Remove the headlight lock screw.
Pull out the headlight set.
Press the headlight bulb seat and rotate it
counterclockwise to remove it.
Remove the headlight bulb and replace it if
necessary.
Specification：
Headlight 12V 35W/35W
Headlight installation
Install in the reverse order of removal.
Alight the headlight set with the headlight lens.
Tighten the lock screw.
Make sure the headlight work properly.
Adjust the headlight beam.
Headlight beam adjustment
Loosen the headlight lock bolt and move the
headlight up and down to adjust headlight
beam.
Tighten the lock bolt after adjustment.
Caution
Do not adjust the headlight beam except
for necessity.
Improper headlight beam adjustment
dazzles the coming driver / rider or results
in insufficient illumination.
To this chapter contents
1 screw
12. Electrical System
Headlight bulb seat
Lock bolt
12-17