Sym MB10A7-A series Service Manual page 76

Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Install the clutch cam plate side spring, ball
retainer, and clutch lifter plate onto the clutch
cam plate.
Install the right crankcase cover (8 bolts).
Reinstall the kick starter, gear shift pedal,
footrest and exhaust pipe.
Refill the specified engine oil.
Loosen the locknut of the clutch adjusting bolt.
Turn the clutch adjusting bolt
counterclockwise to the end and then turn it
clockwise 1/8~1/4 circle to adjust the clutch
free play.
After the clutch clearance adjustment, lock the
adjusting bolt and then the locknut.
Caution
Increase or decrease the clutch
clearance according to the real
circumstance.
To this chapter contents
4. Lubrication / Clutch / Transmission
8 bolts
Turn clockwise 1/8~1/4 circle
4-11