Sym MB10A7-A series Service Manual page 94

To this chapter contents
5. AC. Generator / Starting Clutch
Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
2 screws
Flywheel / starter clutch installation
Install the starter reduction gear shaft (2
bolts).
Install the starter reduction gear and cir clip.
Cir clip
Install the ACG flywheel, starter clutch and
starter clutch gear (1 locknut).
Torque value：5.0~6.0kgf-m
Locknut
Location pins
Install the location pins and new gasket onto
the crankcase.
5-9