Sym MB10A7-A series Service Manual page 99

To this chapter contents
6. Engine Removal
Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Remove the PCV breather tube.
PCV breather pipe
Remove the PCV drain pipe from the drain
pipe clamp.
PCV drain pipe
Remove the inlet pipe lock bolts.
2 bolts
Sleeve nut
Rear wheel axle nut
Loosen the rear wheel axle nut, and the
sleeve nut.
Loosen the adjusting nut and push the rear
wheel forward.
Adjusting nut
Remove the left crankcase rear cover.
Remove the driving sprocket holding bolts.
Turn slightly and take out the stopping plate,
then remove the driving sprocket and chain.
2 bolts
Stopping plate
6-4