Cylinder Removal / Inspection - Sym PA12B Service Manual

Cylinder Removal / Inspection

Remove the cylinder head (refer to chapter 7).
Remove the cylinder head gasket and the
dowel pins
Remove the cam chain guide
Remove the cylinder.
Caution
Prevent the camshaft chain from falling
into the crankcase when removing the
cylinder.
Remove the cylinder gasket and dowel pins.
Clean all the gasket material from the contact
surface.
Note
Use solvent to wet the gasket material in
order to remove it more easily.
Do not damage the contact surface
during operation.
To this chapter contents
Dowel
pins
8. Cylinder / Piston
Cam chain
guide
Cam chain
Dowel pins
8-3