Copier Network Functions
POP Detail screen
Item
APOP Authentication
Port No.
Connection Timeout
To specify E-Mail RX (POP) settings
1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 1-17 for more details.)
2
In the Network Setting screen, touch [5 E-Mail Setting].
3
In the E-Mail Setting screen, touch [2 E-Mail RX (POP)].
The E-Mail RX (POP) screen 1/2 appears.
4
Specify the desired settings.
5
In the E-Mail RX (POP) screen, touch [Detail Setting].
The POP Detail screen appears.
IC-402
Description
Sets whether to turn on authentication.
Set the port number used to communicate with the POP
server. To change the value, press the [C] (clear) key, and
then use the keypad to type in the value (between 1 and
65535).
The transmission with the POP server is interrupted if it re-
mains idle for a specified length of time. To change the val-
ue, press the [C] (clear) key, and then use the keypad to
type in a value (between 30 and 300 seconds).
6
6-29