Table of Contents
Advertisement
Scanning Documents
–
For details on the scan settings, refer to "Specifying the Scan Set-
tings" on page 2-52.
4
After specifying the settings, touch [OK].
–
To send the data to another destination at the same time, touch
[Group], [Address Book] or [Direct Input] to specify or add other
destinations.
5
Load the document into the automatic document feeder or position it
on the original glass of the copier.
6
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Selecting Group Addresses
"Group" refers to multiple destinations that are registered collectively. The
following procedure describes how to send data by selecting a group that
has been registered in advance.
For details on registering groups, refer to "Registering Group Destinations"
on page 3-16.
IC-402
2
2-21
Advertisement
Table of Contents
