Table of Contents
Advertisement
Using PageScope Web Connection
7.10
Program Registration
Click the Scan tab, and then click "Program".
The information to be entered is as follows:
When "E-Mail" is selected
Item
No.
Name
Select from Address
Book
E-Mail Address
Resolution
File Type
Scan Setting
Subject
Text
Simplex/Duplex
Brightness
Color
Separate Scan
Background Removal
Scan Size
File Name
Original Direction
Bind
Special Original
Thick Original
Book Scanning
Method
Center Erase
Bind Destination
Erase
IC-402
Description
Enter the registration number.
Enter the registration name (up to 24 characters).
Click
, and then select the destination from the list to display the
one-touch lists.
Enter the destination e-mail address directly. (up to 80 characters).
Select the resolution.
Select the file format.
Select the unit of the data to be saved.
Specify the subject (Not Specified, 1 to 10). When "Not Specified" was
selected, the default title is used. Click
Specify the text (Not Specified, 1 to 10). When "Not Specified" was
selected, the default text is used. Click
Select "1-Sided", "2-Sided", or "Cover + 2-Sided".
Select the brightness.
Select the color mode. The file formats that can be saved may be
limited depending on the color settings. For details, refer to "File Type"
on page 2-54.
Enable/disable the "Separate Scan" function.
Adjust the background darkness.
Select the original size ("Auto", "Standard Size", "Custom Size").
For "Custom Size", specify the horizontal and vertical scanning sizes.
Enter the file name (up to 26 characters).
Select the orientation of the original document.
Select the original binding position.
Specify whether to specify a mixed original document.
Select whether to enable a thick original document.
Select whether to enable book scanning.
If book scanning is enabled, select the scanning method type.
Specify the width of the center of the document spread that is to be
erased when "Book Scanning" is set to "ON" and "Book Spread" is se-
lected beside "Method".
Specify the binding position when "Book Scanning" is set to "ON" and
"Book Separation" is selected beside "Method".
Specify the width of the perimeter of the document to be erased.
to check the contents.
to check the contents.
7-24
7
Advertisement
Table of Contents
