Search Default Setting; To Specify The Detect Default Server Settings - Konica Minolta Image Controller IC-402 User Manual

Copier Network Functions
6.6

Search Default Setting

You can specify the LDAP server that is to perform searches by priority from
the registered LDAP servers.

To specify the detect default server settings

1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 1-17 for more details.)
2
In the Network Setting screen, touch [4 LDAP Setting].
3
In the LDAP Setting screen, touch [3 Default LDAP Server Setting].
The Default LDAP Server Setting screen appears.
4
Select the LDAP server that is to perform searches by priority.
5
Touch [OK].
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
IC-402
6
6-19