Setting The Sender (From) Address; To Set The Sender (From) Address - Konica Minolta Image Controller IC-402 User Manual

Specifying Network Scanning Settings
5.8

Setting the Sender (From) Address

Follow the procedure described below to specify the e-mail address that ap-
pears in the sender (From) line of e-mail messages sent with the Scan to E-
Mail operation or as a URL notification.

To set the sender (from) address

1
Show the setup screen from the image controller operation panel.
2
Select [Network Setup] — [Service Setup] — [E-mail Setup] and enter
the following settings.
Item
[Fiery Email User Name]
[Fiery Email Domain
Name]
Note
The sender (From) address is Fiery Email User Name@Fiery Email Do-
main Name.
IC-402
Description
Specify the mail user name of the sender.
Specify the mail server domain name to which the sender belongs.
5
5-13