Table of Contents
Advertisement
Copier Network Functions
SMTP Server Address
The SMTP server address used to send e-mail can be specified.
1
In the E-Mail TX (SMTP) screen 2/4, touch [Host Address].
The Host Address screen appears.
2
Touch [IP Address Input] or [Host Name Input].
–
To specify the host address with the IP address, touch [IP Address
Input].
–
To specify the host address with the host name, touch [Host Name
Input].
3
Enter the host address (IP address or host name (up to 255 charac-
ters)).
–
To edit the values that you entered with "IP Address Input", touch
[←] or [→] to move the cursor to the desired area, touch [Delete],
and enter the new value.
–
To clear all values, press the [C] (clear) key.
4
Touch [OK].
The SMTP server address is set.
Note
To cancel changes to the setting, touch [Cancel].
If the host address exceeds 81 characters, touch [Details] to display the
Host Address Detail screen with the rest of the host addresses.
IC-402
6
6-24
Advertisement
Table of Contents
