Tcp Socket Setting - Konica Minolta Image Controller IC-402 User Manual

Using PageScope Web Connection
7.29

TCP Socket Setting

You can specify TCP socket settings.
The settings that can be specified are described below.
Item
TCP Socket
Port No.
Use SSL/TLS
Port Number(SSL/TLS)
TCP Socket(ASCII Mode)
Port Number(ASCII Mode)
Reminder
When changing the TCP socket settings, be sure to turn the power of the
copier off, then on again.
When the copier is turned off, then on again, turn off the auxiliary power
button before turning off the main power switch. In addition, wait at least
10 seconds to turn the machine on after turning it off; otherwise, the ma-
chine may not function normally.
If a certificate is set to "Enable" from the copier, a page appears for spec-
ifying settings for "Port Number (SSL/TLS)".
If "TCP Socket" is set to "OFF", it may no longer be possible to use ap-
plications on some computers.
IC-402
Description
Specify whether to use a TCP socket.
Display the port number (input range: 1 to 65535).
Select to use SSL/TLS.
Display the port number for SSL/TLS (input range: 1 to 65535).
Specify whether to use a TCP socket in the ASCII mode.
Display the port number (input range: 1 to 65535).
7
7-74