Table of Contents
Advertisement
Registering Destinations (Recipients) for Network Scanning
11
Touch [User ID] and type in the user ID using the keyboard that appears
on the screen.
–
If the user ID is not to be registered, touch [anonymous] on the Reg-
ister FTP screen.
12
Touch [OK].
13
Touch [Password] and type in the password using the keyboard that
appears on the screen.
14
Touch [OK].
15
Touch [Index] and touch the desired button.
–
This specifies the characters used to index the destination.
–
For destinations that are often used, specify [Main] at the same
time, and it will be easier to search.
–
If the first character of the name is a letter, the first character is au-
tomatically registered as the indexing character.
16
Touch [OK].
17
Press the [C] (clear) key to erase the value, and then use the keypad to
type in the port number (between 1 and 65535).
–
To enable PASV mode, touch [PASV Mode].
–
To use a proxy server, touch [Proxy].
–
If a value outside of the allowable range is specified, the message
"Input Error" appears. Type in a value within the allowable range.
18
Touch [OK].
The FTP destination is registered.
IC-402
3
3-7
Advertisement
Table of Contents
