Using PageScope Web Connection
7.2
Accessing PageScope Web Connection
To access PageScope Web Connection
PageScope Web Connection can be accessed directly from a Web browser.
1
Start the Web browser.
2
In the Address bar, type the IP address of this image controller, and
then press the [Enter] key.
–
http://<IP_address_of_the_image_controller>/
Example: If the IP address of the image controller is 192.168.1.20
http://192.168.1.20/
!
Detail
Below is the URL after SSL/TLS is enabled.
https://<IP_address_of_the_image_controller>/Redirected to "https://"
even if "http://" is entered.
Note
If user authentication is enabled, a page for entering the user name and
password appears before you can operate the machine.
IC-402
7
7-3