Using PageScope Web Connection
Changing the Administrator Password
Changing the Image Controller's Administrator Password
1
Display image controller screen, and then display the setup screen for
the image controller.
2
Use [Change Password] to change the password.
!
Detail
For details on displaying the setup screen from the operation panel of the
image controller, refer to "Entering the Image Controller Setup Screen"
on page 5-4.
Note
When displaying the setup screen on the image controller, a password
may be requested. Contact the administrator of the image controller for
the password.
Changing the Copier's Administrator Password
1
On the copier operation panel, press the [Utility/Counter] key.
2
Touch [3 Administrator Setting].
3
Input Administrator Code and touch [OK].
4
Touch [9 Security Setting].
5
Touch [1 Administrator Password].
6
Change the password.
Note
Contact the administrator of the copier for the administrator password.
IC-402
7
7-12