Table of Contents
Advertisement
Copier Network Functions
6.8
E-Mail RX (POP) Settings
Specify the necessary settings when the "POP Before SMTP" setting is re-
quired with a transmission using the status notification setting.
Note
Specify the settings for a POP e-mail reception in order to use the follow-
ing copier functions.
When the "POP Before SMTP" setting is required with a transmission for
the notification of the status and total counter
E-Mail RX (POP) Parameters
The E-Mail RX (POP) parameters are as follows:
E-Mail RX (POP) screen 1/2
Item
E-Mail RX Setting
POP Server Address
Login Name
Password
E-Mail RX (POP) screen 2/2
Item
SSL Setting
Port Number (SSL)
IC-402
Description
Select whether to enable or disable the POP settings.
Sets the POP server address.
For details on specifying the settings, refer to "POP Server
Address" on page 6-31.
Sets the login name used to connect to the POP server.
Use the keyboard that appears in the touch panel to type in
the login name (up to 63 characters).
Sets the password used to connect to the POP server. Use
the keyboard that appears in the touch panel to type in the
password (up to 15 characters).
Description
Specify whether to use SSL in the authentication reception
time. When SSL is used, the content that is sent is encrypt-
ed.
Specify the port number for using SSL. To change the val-
ue, press the [C] (clear) key, and then use the keypad to
type in the value (between 1 and 65535).
6
6-28
Advertisement
Table of Contents
