Table of Contents
Advertisement
Copier Network Functions
6.7
E-Mail TX (SMTP) Settings
The e-mail transmission settings necessary for using the copier's status no-
tification setting can be specified. In addition, these settings are also related
to the e-mail transmission functions used with the network scan functions of
the image controller.
Note
Specify the settings for an SMTP e-mail transmission in order to use the
following copier functions.
Status Notification Setting parameters (p. 6-38)
Total Counter Report Setting (p. 6-40)
Reminder
If "E-Mail TX Setting" is set to "Restrict", the e-mail transmission func-
tions used with the network scan functions of the image controller cannot
be used. In order to use the e-mail transmission functions, be sure to se-
lect "Allow".
E-Mail TX (SMTP) Parameters
The E-Mail TX (SMTP) parameters are as follows:
E-Mail TX (SMTP) screen 1/4
Item
E-Mail TX Setting
Scan to E-Mail
E-Mail Notification
Meter Count Notification
Detail Setting
E-Mail TX (SMTP) screen 2/4
Item
SMTP Server Address
IC-402
Description
Specify whether to use an e-mail transmission.
Specify whether to use a scan transmission.
Specify whether to use the status notification function.
Specify whether to use the total counter notification func-
tion.
Specify the SMTP details. For details on specifying the set-
ting, refer to "SMTP Detail" on page 6-25.
Description
The SMTP server address used to send e-mail can be
specified. For details on specifying the settings, refer to
"SMTP Server Address" on page 6-24.
6
6-20
Advertisement
Table of Contents
