Table of Contents
Advertisement
Copier Network Functions
6.12
Total Counter Report Setting
You can specify the total counter notification schedule and notification des-
tination.
The total counter notification settings are as follows:
Item
Set Schedule
Set notification addresses.
Device Nickname
[Send Now] button
To specify the total counter notification settings
1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 1-17 for more details.)
2
In the Network Setting screen, touch [6 Detail Setting].
3
In the Detail Setting screen, touch [4 Total Counter Report Setting].
–
In order to use this function, the E-Mail TX (SMTP) parameters must
be correctly specified. Refer to "E-Mail TX (SMTP) Parameters" on
page 6-20 for more details.
–
If the "POP Before SMTP" setting is required, the settings for POP
e-mail reception must be specified correctly. For details, refer to "E-
Mail RX (POP) Settings" on page 6-28.
–
If a status notification e-mail message was not received by the re-
cipient, for example, due to an incorrect e-mail address, a message
specifying the error is sent to the e-mail address specified with the
"Administrator Registration" parameter on the Administrator/Ma-
chine Setting screen in Administrator mode.
The Total Counter Report Setting screen appears.
IC-402
Description
Specify the period for notifying the total counter. Two types
of notification schedules can be specified. For details on
specifying the setting, refer to "Schedule Setting" on
page 6-41.
Specify the e-mail address of the notification destination.
The schedule can also be specified per address. For details
on specifying the setting, refer to "Notification Address Set-
ting" on page 6-43.
Specify the model name that is included in the notification
e-mail. Use the keyboard that appears in the touch panel to
type in the model name (up to 20 characters).
Touch to send the current total counter to the notification
destination.
6
6-40
Advertisement
Table of Contents
