Table of Contents
Advertisement
Scanning Documents
2.2
Displaying the Scan Screen
Display the Scan mode screen in order to perform scanning operations.
Turn the machine on. When the machine is ready to make copies, the Basic
screen appears.
Press the [Scan] key in the control panel to display the Scan mode screen.
The displayed functions and modes can be selected by gently touching the
buttons that are displayed in the screen.
2
1
No
Name
1
Sub display area
2
[Job List] button
3
Date/Time display area
4
Message display area
5
[Program] button
6
[Group] button
7
[Address Book] button
8
[Direct Input] button
9
Available memory display
10
Address number display
area
11
[Scan Settings] button
IC-402
3
4
5
6
Description
This area displays destinations, etc.
Displays jobs being performed and jobs being stored.
Various commands for checking and managing jobs are
available.
Displays the current date/time.
Displays the copier status and details on operations that
must be performed.
Displays destinations that are registered in programs.
Displays destinations that are registered in groups.
Used to search for abbreviated destinations that are
registered.
Used to type in the destination when performing Scan to
E-mail, Scan to FTP, or Scan to SMB operations or to se-
lect the mailbox where the job is to be stored.
This button does not appear if the [Manual Destination In-
put] on the Security Details screen (displayed by touching
[9 Security Setting] on the Administrator Setting screen)
is set to "Restrict".
Shows the amount of space available on the copier's
built-in memory.
Shows the number of specified addresses.
Used to specify scan settings.
7 8
9
10
2
11
2-5
Advertisement
Table of Contents
