Table of Contents
Advertisement
Scanning Documents
No.
Part Name
6
[Scan] key
7
[Copy] key
8
[Reset] key
9
[Interrupt] key
10
Auxiliary power button
11
[Stop] key
12
[Start] key
13
Main Power indicator
14
Data indicator
15
[Proof Copy] key
16
Keypad
17
[C] (clear) key
18
[Mode Check] key
19
[Utility/Counter] key
20
[Mode Memory] key
21
Contrast dial
IC-402
Description
Press to enter Scan mode. While the machine is in
Scan mode, the indicator on the [Scan] key lights
up in green.
For details, refer to this manual.
Press to enter Copy mode. (As a default, the
machine is in Copy mode.) While the machine is in
Copy mode, the indicator on the [Copy] key lights
up in green.
For details, refer to the User's Guide [Copy Opera-
tions].
Press to clear all settings (except programmed
settings) entered in the control panel and touch
panel.
Press to enter Interrupt mode. While the machine is
in Interrupt mode, the indicator on the [Interrupt]
key lights up in green and the message "Now in
Interrupt mode." appears on the touch panel. To
cancel Interrupt mode, press the [Interrupt] key
again.
Press to turn on/off machine operations, for exam-
ple, for copying, printing or scanning. When turned
off, the copier enters a state where it conserves en-
ergy.
Press the [Stop] key during scanning to stop the
scan operation.
Press to start scanning. When the copier is ready to
begin scanning, the indicator on the [Start] key
lights up in green. If the indicator on the [Start] key
lights up in orange, scanning cannot begin.
Press to restart a stopped job.
Lights up in green when the copier is turned on with
the auxiliary power button
Flashes in green while a print job is being received.
Lights up in green when data is being printed.
Press to print a single proof copy to be checked
before printing a large number of copies.
Use to type in the number of copies to be
produced.
Use to type in the zoom ratio.
Use to type in the various settings.
Press to erase a value (such as the number of
copies, a zoom ratio, or a size) entered using the
keypad.
Press to display screens showing the specified
settings.
Press to display the Utility screen and Meter Count
screen.
Press to register the desired copy settings as a pro-
gram or to recall a registered copy program.
Use to adjust the contrast of the touch panel.
2
2-3
Advertisement
Table of Contents
