Table of Contents
Advertisement
Scanning Documents
8
After specifying the settings, touch [OK].
–
To send the data to another destination at the same time, touch
[Group] or [Address Book] to specify or add other destinations.
–
If a destination registered in a program is added, the scan settings
registered in the program are given priority, and the scan data is
sent with the scan settings registered in the program.
9
Load the document into the automatic document feeder or position it
on the original glass of the copier.
10
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
IC-402
2
2-30
Advertisement
Table of Contents
