Scan To E-Mail (S/Mime) Using Pki Card; Overview - Konica Minolta bizhub C220 User Manual

How to Use the Authentication Unit
3.5

Scan to E-mail (S/MIME) Using PKI Card

3.5.1

Overview

This function uses the PKI card to add a digital signature when sending an
e-mail. Sending an e-mail with a digital signature enables you to prove you
are the e-mail sender.
If a certificate is registered in the target address, you can combine this
function with e-mail encryption when sending an e-mail. Sending an
encrypted e-mail prevents information from being leaked to a third party on
the transmission route.
The certificate obtained from the PKI card is used to encrypt an e-mail to the
user's address using the Scan to Me function. For details on the Scan to Me
function, refer to "Scan to Me" (page 50).
PKI Card
Note
This function is not available when you log into the MFP as a public user
or User Box administrator.
AU-211P
Tapping, fabrication or spoofing
Encryption +
Digital Signature
3
36