Before Using the Scan Functions
1
Before Using the Scan Functions
1.1
Environment Required for Using the Scan Functions
The following conditions are required to use the network and scanning func-
tions.
- The machine is connected to the network.
The functions can be used over a TCP/IP network.
–
For details on connecting the network cable, refer to "Connecting to the
Network" on page 1-11.
–
In order to use this machine on a network, settings such as the IP address
of the image controller must be specified. For details, refer to "Settings
for Using Network/Scanning Functions" on page 1-8.
IC-402
1
1-2