Table of Contents
Advertisement
Scanning Documents
3
Enter the host name, destination folder, user name, and password.
–
Host Name: Use the keyboard that appears in the touch panel to
specify the destination host name or IP address, and then touch
[OK].
–
In order to specify an FTP destination as a host name, the DNS set-
ting must have been specified in the image controller's setup
screen. In the setup screen for the image controller, select [Network
Setup] – [Protocol Setup] – [TCP/IP Setup] – [DNS Setup] to specify
the setting. For details on displaying the image controller's setup
screen, refer to "Displaying the Setup Screen" on page 5-4.
–
Destination Folder: Use the keyboard that appears in the touch
panel to specify the path to the destination folder, and then touch
[OK].
–
User Name: Use the keyboard that appears in the touch panel to
specify the login user name, and then touch [OK].
–
Password: Use the keyboard that appears in the touch panel to
specify the password, and then touch [OK].
4
Touch [Detail Setting], and then specify detailed FTP settings.
–
Port Number: Check the port number.
–
PASV mode: Select whether the PASV (passive) mode is used.
Touch [Yes] or [No].
–
Proxy: Select whether a proxy server is used. Touch [Yes] or [No].
5
Touch [OK].
IC-402
2
2-28
Advertisement
Table of Contents
