Table of Contents
Advertisement
Using PageScope Web Connection
Item
No.
LDAP Server Name
Server Address
Port No.
Enable SSL/Port No. (SSL)
Search Base
Timeout
Max Search Results
Authentication Method
Login Name
Password
Domain Name
Select Server Authentication
Method
Use Referral
[Check Connection] button
IC-402
Description
Displays the LDAP server number.
Enter the LDAP server name.
Enter the LDAP server address (syntax: "***.***.***.***" or
FQDN where the input range of *** is 0 to 255). Symbols "-"
and "." can be used.
Enter the port number used to communicate with the LDAP
server (input range: 1 to 65535).
Specify whether to perform communications with the LDAP
server using SSL. Also, enter the port number to be used
(input range: 1 to 65535).
Enter the search start point of the LDAP search (up to 255
characters).
Enter the LDAP search timeout (input range: 5 to 300
seconds).
Enter the maximum number of hits to be received as the LDAP
search result (input range: 5 to 1000).
Set the LDAP authentication method.
Enter the login name if authentication is not set to
"anonymous" (up to 255 characters).
Enter the password if authentication is not set to
"anonymous" (up to 128 characters).
Enter the domain name if authentication is set to "GSS-
SPNEGO" (up to 64 characters).
Select the LDAP server authentication method.
Specify whether to use the referral setting. When referral is
used, the search base that was specified in LDAP Sever Set-
ting searches the top and bottom levels as the starting point.
Click to check the connection to the LDAP server using the
specified settings.
7
7-55
Advertisement
Table of Contents
