Scanning Documents
3
Type in the name of the mailbox where the data is to be saved.
–
Check that the mailbox where the document is to be saved exists
on the hard disk of the image controller, and then correctly type in
the name of the mailbox.
–
Correctly type in the mailbox name using uppercase and lowercase
letters.
4
Touch [OK].
The selected destinations are listed under "Broadcast Destinations".
5
Touch [Scan Settings], and then specify the scan settings.
–
For details on the scan settings, refer to "Specifying the Scan Set-
tings" on page 2-52.
IC-402
2
2-50