Configuring Lpr Port Printing - Ricoh SCRIPT2 Setup Manual

Windows 2000 Configuration

Configuring LPR Port Printing

This section explains the procedure for printing to a LPR port from Windows
2000.
Note
❒ The TCP/IP protocols must be installed and configured correctly. For more
2
information about configuring the protocol, see P.17 "Configuring TCP/IP and
IPP for Printing".
A
Click [Start], point to [Settings], and then click [Printers].
The [Printers] window appears.
B
Click the icon of the printer you want to use. On the [File] menu, click [Prop-
erties].
C
In the [Available port types:] box, click "LPR Port", and then click [New Port].
Note
❒ If "LPR Port" does not appear, "Print Services for Unix" has not been in-
stalled.
D
Type the IP address of the Network Interface Board into the [Name or address
of server providing lpd:] box.
E
Type "lp" into the [Name of printer or print queue on that server box:], and click
[OK].
F
Click [Close].
G
Confirm that the port name is displayed in the [Print to the following port(s)]
box and the check mark is inside the check box, and then click [OK].
28