Netware 3.X - Advanced Settings; Setting Up As A Print Server - Ricoh SCRIPT2 Setup Manual

NetWare Configuration

NetWare 3.x - Advanced Settings

The actual procedures for configuring the printer differ depending on whether
the Network Interface Board is configured as a print server or as a remote print-
er. This section describes how to configure it in the NetWare 3.x environment.
Basic Procedure
Install the NIB Setup Tool
Print Server
Configure the Network Interface Board
4
Configure the NetWare
Turn the power
off and on
Preparation
The following procedures use the Property Sheet method in configuring the
Network Interface Board. If you configure the Network Interface Board as a
NetWare print server for the first time, we recommend you use the Wizard
method. ⇒ P.51 "Quick Setup Using the NIB Setup Tool Wizard"
Note
❒ This section assumes NetWare is functional and that the necessary environ-
ment for the NetWare Print Service is available.

Setting Up as a Print Server

A
Log on to the file server as a Supervisor or a Supervisor equivalent.
B
Run the NIB Setup Tool.
Reference
⇒ P.50 "Running the NIB Setup Tool"
C
Click [Property Sheet] and click [OK].
The [Browse] dialog box of the Network Interface Board appears.
D
Click [IPX protocol].
54
Remote Printer
Start the print server