Ricoh SCRIPT2 Setup Manual page 354

Using RICOH-SCRIPT2 with Windows
Note
❒ Selecting [OHP Transparency] as the paper type automatically adjusts in-
ternal settings to use a color profile specifically for OHP transparencies.
Even though the color profile has been optimized for OHPs, the adjust-
1
ments are automatic and are not indicated in any of the dialog boxes. In
this case, the "Color Profile" setting in the [Advanced Options] dialog box
is not enabled.
❖ ❖ ❖ ❖ Color
Use this to set the output color. The following items are available: [Black &
White] and [Color].
Note
❒ Some files which include the JPEG, BMP or PSD (Photoshop) data might
be printed in color even though Black & White is selected in Color. In this
case, if you want to print a whole document in the black & white mode,
you must select [Black and White] in Color Mode in the [Advanced Options] di-
alog box.
❖ ❖ ❖ ❖ Advanced
Click to open the [Advanced Options] dialog box. ⇒ P.10 "[Advanced Options]
dialog box"
[Advanced Options] dialog box
❖ ❖ ❖ ❖ Paper/Output
• Paper Size
Shows the currently selected paper size. You can use the list box to select
another paper size if you want.
Selecting [PostScript Custom Page Size] opens the [PostScript Custom Page Size
Definition] dialog box, where you can specify the width and length of the
custom size paper.
Note
❒ You can specify the width and length in inch, millimeter or point unit.
When specifying them in millimeter unit, the custom paper size may
not be correctly set.
Reference
For more information about the paper sizes supported by this printer,
see P.32 "Specifications".
❖ ❖ ❖ ❖ Graphic
• Print Quality
Use this to select the resolution; 600 dpi or 300 dpi.
• Image Color Management
Use this to set the Image Color Management (ICM).
10