Ricoh SCRIPT2 Setup Manual page 66

Installing the Printer Driver and Software
E
Double-click the [ColorSync™ Profiles] folder in the CD-ROM.
F
Copy all four files in the [ColorSync™ Profiles] folder.
The ColorSync profiles are installed.
Setting up the PPD file
Preparation
Confirm that the printer is connected to an AppleTalk network before per-
forming the following procedure.
A
On the Apple menu, select [Chooser].
B
Click the [LaserWriter 8] icon.
4
C
In the [Select a PostScript Printer] list, click the name of the printer you want
to use, and then click [Create].
Note
❒ If your network has multiple zones, click the name of the zone the printer
belongs to in the [AppleTalk Zones] list in the lower left side of the [Chooser]
dialog box.
D
Click the name of the printer, and then click [Select].
Note
❒ Be sure to select the PPD file correctly. If the correct PPD file is not selected,
certain options may not be available.
The PPD file is set up and the LaserWriter 8 icon appears at the left of the
printer name in the list. Next, follow the procedure on P.54 "Setting up op-
tions" to make the option settings, or to close the [Chooser] dialog box.
Setting up options
A
On the Apple menu, select [Chooser].
B
Click the [LaserWriter 8] icon.
C
In the [Select a PostScript Printer] list, click the name of the printer you want
to use, and then click [Setup].
Note
❒ If your network has multiple zones, click the name of the zone the printer
belongs to in the [AppleTalk Zones] list in the lower left side of the [Chooser]
dialog box.
D
Click [Configure].
A list of options appears.
54