Ricoh SCRIPT2 Setup Manual page 93

A
Click [Start] on the taskbar, point to [Settings], and then click [Printers].
The [Printers] window appears.
B
Click the icon of the printer whose default settings you want to change.
C
On the [File] menu, click [Printing Preferences].
The Printing Preferences Properties appear.
D
Make desired settings, and then click [OK].
Reference
For more information about making printer default settings, see the "Op-
erating Instructions" for RICOH-SCRIPT2 included as a PDF file on the
CD-ROM.
Note
❒ Settings you make here are used as the default settings for all applications.
Making printer settings from an application
To make the printer settings for a specific application, open the Printing Prefer-
ences Properties from that application. The following example describes how to
make settings for the WordPad application that comes with Windows 2000.
Note
❒ General users can change the settings in an application's [Print] window.
❒ The actual procedures you should follow to open the Printing Preferences
Properties may differ depending on the application. For more information,
see the documentation that comes with the application you are using.
❒ Any settings you make in the following procedure are valid for the current
application only.
A
On the [File] menu, click [Print].
The [Print] window appears.
B
Select the printer you want to use in the [Select Printer] box.
C
Make desired settings, and then click [Print] to start printing.
Reference
For more information about each tab, see the "Operating Instruction" for
RICOH-SCRIPT2 included as a PDF file on the CD-ROM.
D
Click [OK] to start printing.
RICOH-SCRIPT2 - Setting Up for Printing
1
9