Ricoh SCRIPT2 Setup Manual page 347

[Custom-Defined Size] dialog box
❖ ❖ ❖ ❖ Paper name
You can give a name to the custom size paper you are going to define.
❖ ❖ ❖ ❖ Width, Length
Use these to define the width and length of the custom size paper.
❖ ❖ ❖ ❖ Units
Select the unit of the width and length; inch or millimeter.
Note
❒ When specifying the width and length in millimeter unit, the custom paper
size may not be correctly set.
❒ Do not turn on [Traverse].
[Graphics] tab
❖ ❖ ❖ ❖ Resolution
Use this to select the resolution; 600 dpi or 300 dpi.
❖ ❖ ❖ ❖ Color control
Use this to select whether or not you want the colors in the documents to be
adjusted before printing so that the printed page more closely matches the
colors on the screen.
❖ ❖ ❖ ❖ Halftoning
Select the halftone pattern you want to use for printing. The following items
are available: [Use printer's settings] and [Use settings below].
Note
❒ You can select [Use settings below], but modifying [Screen frequency:] or
[Screen angle:] has no effect on the printing result.
❖ ❖ ❖ ❖ Special
Use this to control the print image. Selecting a check box changes the icon on
the left so that it reflects the option you select.
• Print as a negative image
Select this option to print a negative image, which is produced by replac-
ing the three primary colors with their complementary colors, and by re-
versing black and white.
Note
❒ Using negative image printing to output a color image might produce
unexpected results.
• Print as a mirror image
Select this option to print a mirror image of the document by reversing the
horizontal coordinates.
Using RICOH-SCRIPT2 with Windows 95/98/Me
1
3