Ricoh SCRIPT2 Setup Manual page 358

Using RICOH-SCRIPT2 with Windows
❖ ❖ ❖ ❖ Halftone
Changing this setting will not affect printing result.
❖ ❖ ❖ ❖ Halftone Setup
Changing this setting will not affect printing result.
1
❖ ❖ ❖ ❖ Form to Tray Assignment
You normally do not need to change this setting.
Note
❒ If the paper tray you want to use is not available here, even though it is
physically installed, use the [Device Settings] tab to make the printer recog-
nize the tray correctly.
❖ ❖ ❖ ❖ Font Substitution Table
Use this to edit the TrueType font substitution table. Under [Font Substitution
Table], the TrueType fonts installed on the computer are displayed. Select the
setting you want to use from [Change Setting] for each TrueType font.
❖ ❖ ❖ ❖ Job Timeout
Use this to set a job timeout period in the range of 0 to 32767 seconds. Setting
the value to 0 turns the job timeout off.
❖ ❖ ❖ ❖ Wait Timeout
Use this to set a wait timeout period in the range of 0 to 32767 seconds. Setting
the value to 0 turns the wait timeout off.
❖ ❖ ❖ ❖ Total Printer Memory
Use this to select the amount of memory actually installed in the printer. The
following items are available: [32 MB], [64 MB], [96 MB], [128 MB], [160 MB], [192
MB] and [256 MB].
❖ ❖ ❖ ❖ Option Tray
Use this to select if the optional tray is installed in the printer. The following
items are available: [None] and [Tray 2].
❖ ❖ ❖ ❖ Duplex Unit
When the optional duplex unit is installed to the printer, select [Installed]. If
not, select [Not Installed].
14