Ricoh SCRIPT2 Setup Manual page 279

N
Type the name of the printer into the [Printer Name] box, and the name of the
print queue into the [Print Queue Name] box.
The default setting for Printer Name is "Print Server Name" followed by "_1"
and that for Print Queue Name is "Print Server Name" followed by "_Q"
(quotation marks are not included). You can change them if necessary.
O
If you have selected NDS mode, type the volume of the print queue into the
[Queue Volume] box.
Clicking [Browse], you can select one of those shown in the [Browse] dialog
box.
P
Click [Next >].
A dialog box to confirm the printing environment appears.
Q
After confirming the environment, click [Next >].
If you want to change the settings, click [< Back] and make the settings again.
Clicking [Next >], the NIB Setup Tool automatically creates the Print Server,
the Printer, and the Print Queue in the NetWare network.
R
After a confirmation dialog box appears, select [Quit] and click [Finish] to
exit the NIB Setup Tool.
Quick Setup Using the NIB Setup Tool Wizard
4
53