Ricoh SCRIPT2 Setup Manual page 284

NetWare Configuration
J
On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
K
Type "PCONSOLE" from the command prompt.
F:> PCONSOLE
L
Create a print queue as follows.
Note
❒ If you use a currently defined print queue, go to step L.
A From the [Available Options] menu, select [Print Queue Information] and press
the { { { { ENTER} } } } key.
B Press the { { { { INSERT} } } } key and type a print queue name.
C Press the { { { { ESC} } } } key to return to the [Available Options] menu.
4
M
Create a printer as follows.
A From the [Available Options] menu, select [Print Server Information] and press
the { { { { ENTER} } } } key.
B To create a new print server, press the { { { { INSERT} } } } key and type a print
server name.
If you use an currently defined print server, select one of the print servers
shown in the [Print Server] list.
Important
❒ Use the same name as that specified in the NIB Setup Tool. (Step H).
C From the [Print Server Information] menu, select [Print Server Configuration].
D From the [Print Server Configuration] menu, select [Printer Configuration].
E Select the printer which is indicated as "Not Installed".
Important
❒ Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step I-D).
F If you change the name of the printer, type a new name.
A name "Printer x" is assigned to the printer. x stands for the number of the
selected printer.
G As type, select [Remote Parallel, LPT1].
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
H Press the { { { { ESC} } } } key, and click [Yes] in the confirmation dialog box.
I Press the { { { { ESC} } } } key to return to [Print Server Configuration Menu].
58