Network Configuration Page - Ricoh SCRIPT2 Setup Manual

Appendix

Network Configuration Page

You can confirm the network information on the network configuration page.
A
Confirm that the printer is online.
B
Hold down the button on the Network Interface Board for two seconds, and
release it.
The network configuration page is printed.
Note
❒ If you hold down the button for five seconds, the system log information
is printed. For more information about the meaning of the data printed, see
P.96 "System Log Information".
❒ When DHCP is active, "Current value" is displayed as the current config-
uration.
6
1.
MAC address
2.
Printer name
3.
TCP/IP
IP address
Subnet mask
Default gateway address
108
Access control address
Access control mask
Network boot
(Command boot)
Frame type
*: WINS server addresses are dis-
played when DHCP is active.
1
2
3
*
4
5
6