Basic copy operations
–
For details on specifying the binding margin position,
refer to "Selecting the position of the binding margin
(Binding Position settings)" on page 2-22.
–
For transparent or translucent documents, place a
blank sheet of paper of the same size as the
document over the document.
–
For bound documents spread over two facing pages,
such as a book or magazine, position the top of the
document toward the back of this machine and align
the document with the
corner of the document scales, as shown.
4
Close the ADF.
Scanning the document in separate batches ("Separate Scan" setting)
A large document can be divided and scanned in a number of batches.
A maximum of 100 document pages can be loaded into the ADF at one time. However, by specifying the
"Separate Scan" setting, a document that exceeds 100 pages can be scanned and treated as a single copy
job. In addition, the scanning location can be switched between the original glass and the ADF during the
scanning operation.
C650
mark in the back-left
Original scales
Blank sheet
of paper
2
2-8