Table of Contents
Advertisement
Basic copy operations
Scanning the document in separate batches ("Separate Scan" setting)
A large document can be divided and scanned in a number of batches.
A maximum of 100 document pages can be loaded into the ADF at one time.
However, by copying with the "Separate Scan" setting, a document that ex-
ceeds 100 pages can be scanned and treated as a single copy job. In addi-
tion, the scanning location can be switched between the original glass and
the ADF during the scanning operation.
0 The loading capacity of the ADF is 100 sheets of plain paper (21-1/4 lb)
or 38 sheets of thick paper (55-3/4 lb).
0 Either "Auto Print" or "Batch Print" can be selected as the print setting
when scanning with the "Separate Scan" setting. The default setting is
"Auto Print". For details on selecting the print setting for scanning with
the "Separate Scan" setting, refer to "Copier setting" on page 12-22.
0 For details on positioning the document, refer to "Feeding the document"
on page 3-7.
1
Position the document to be copied.
2
In the Basic screen, touch [Separate Scan].
–
To cancel the "Separate Scan" setting, touch [Separate Scan] again
to deselect it.
C252
3
3-11
Advertisement
Table of Contents
Troubleshooting
