Edge To Edge - Lexmark X850e Service Manual

The Configuration ID setting allows you to set both Configuration IDs simultaneously. To set one or both
Configuration IDs:
1.
From the PRINTER SETUP menu, touch the icon to the right of the Configuration ID menu item. The
screen displays the value of both Configuration IDs. By default, the cursor appears on the Configuration
ID 1 line.
vga
CC 00 01 81
Config ID1
Config ID2 B0 55 70 0C
1
4
7
?
Submit
2.
To change the value of Configuration ID 1, touch the Backspace key to erase any of the existing
characters. Then enter the correct ID using the number and letter keys that appear on the screen.
3.
To edit the value of Configuration ID 2, touch a section of the display screen that appears inside of the text
box containing the current value of Configuration ID 2. The cursor appears in the text box containing the
current value of Configuration ID 2.
4.
To change the value of Configuration ID 2, touch the Backspace key to erase any of the existing
characters. Then enter the correct ID using the number and letter keys that appear on the screen.
Note: To exit the Configuration ID screen and return to the PRINTER SETUP menu, touch Back.
Note: Although it is recommended that all unused and reserved bits be set to zero, the code will not validate or
enforce this condition.
5.
To save the values of both Configuration IDs, touch Submit. The printer validates both IDs. If either ID is
invalid, the printer posts Invalid ID, discards any changes, and displays the original Configuration IDs.
If both IDs are valid, the printer automatically returns to the PRINTER SETUP menu.

Edge to Edge

When this setting is On, the text and graphics are shifted to the physical edges of the paper for all margins.
When this setting is Off, the normal margins are restored.
2
3
5 6
8 9
0
a b
c d
e f
Back
Diagnostic aids
7500-XXX
3-21