Hcf Media Tray Assembly Removal - Lexmark X850e Service Manual

7500-XXX

HCF media tray assembly removal

1.
Pull out the HCF media tray assembly (A) from the unit.
2.
Release the two bearing slides (B) by inserting a prying tool into the two holes while pulling the HCF media
tray (A) from the frame assembly (B).
3.
Remove the HCF media tray (A) from the frame assembly.
Note: A little force is required to remove the HCF media tray (A) from the unit.
Note: Before re-installing the HCF media tray (A), ensure the two bearing slides (B) are properly installed into
the frame assembly.
Note: Extra force is required to re-install the HCF media tray (A) to the unit.
4-54
Options Service Manual
Hole
B
Hole B
A
A