Stapler Unit Frame Removal - Lexmark X850e Service Manual

Stapler unit frame removal

1.
Remove the finisher front door assembly. See
2.
Remove the staple cartridge.
3.
Remove the rear upper cover. See
4.
Remove the rear lower cover. See
5.
Loosen the four screws securing the plate (A) to the finisher.
6.
Move the plate (A) toward the right and out in the direction shown.
7.
Remove the plate.
"Finisher front door assembly removal" on page
"Rear upper cover removal" on page
"Rear lower cover removal" on page
A
7500-XXX
4-101.
4-100.
Rear
Repair information
4-104.
4-131