Error Code Messages - 2X 500-Sheet Drawer (2Tm) - Lexmark X850e Service Manual

Error code messages - 2X 500-sheet drawer (2TM)

Error code or
message
243.00
Paper jam
Check tray 3
243.01
Paper jam
Check areas C,
tray 3
243.02
Paper jam
Check areas A,
B
243.03
Paper jam
Check area B
243.04
Paper jam
Check area C
244.00
Paper jam
Check areas C,
tray 4
244.01
Paper jam
Check areas C,
tray 4
244.02
Paper jam
Check areas B,
C
244.03
Paper jam
Check area B
244.04
Paper jam
Check tray 4
Error contents
Sensor (pre-feed) on jam (tray
3 media feed)
Sensor (tray 3 feed-out) on jam
(tray 3 media feed)
Sensor (tray 2 feed-out) on jam
(tray 3 media feed)
Sensor (registration) on jam
(tray 3 media feed)
Sensor (tray 3 feed-out) static
jam
Sensor (tray 4 feed-out) on jam
(tray 4 media feed)
Sensor (tray 3 feed-out) on jam
(tray 4 media feed)
Sensor (tray 2 feed-out) on jam
(tray 4 media feed)
Sensor (registration) on jam
(tray 4 media feed)
Sensor (pre-feed) on jam (tray
4 media feed)
Description/Action
The pre-feed sensor 3 is not turned on within the
specified time after the tray 3 feed lift motor is turned on.
Go to "243.00 Sensor (pre-feed) on jam (tray 3 media
feed)" on page 2-5.
The sensor (tray 3 feed-out) is not turned on within the
specified time after the sensor (pre-feed) is turned on.
Go to "243.01 Sensor (tray 3 feed-out) on jam (tray 3
media feed)" on page 2-6.
The sensor (tray 2 feed-out) is not turned on within the
specified time after the sensor (tray 3 feed-out) is turned
on.
Go to "243.02 Sensor (tray 2 feed-out) on jam (tray 3
media feed)" on page 2-8.
The sensor (registration) is not turned on within the
specified time after the sensor (tray 3 feed-out) is turned
on.
"243.03 Sensor (registration) on jam (tray 3
Go to
media feed)" on page 2-10.
Media remains on the sensor (tray 3 feed-out).
Go to "243.04 Sensor (tray 3 feed-out) static jam" on
page 2-12.
The sensor (tray 4 feed-out) is not turned on within the
specified time after the sensor (pre-feed) is turned on.
"243.04 Sensor (tray 3 feed-out) static jam" on
Go to
page 2-12.
The sensor (tray 3 feed-out) is not turned on within the
specified time after the sensor (tray 4 feed-out) is turned
on.
"244.01 Sensor (tray 3 feed-out) on jam (tray 4
Go to
media feed)" on page 2-14.
The sensor (tray 2 feed-out) is not turned on within the
specified time after the sensor (tray 4 feed-out) is turned
on.
Go to "244.02 Sensor (tray 2 feed-out) on jam (tray 4
media feed)" on page 2-16.
The sensor (registration) is not turned on within the
specified time after the sensor (tray 4 feed-out) is turned
on.
"244.03 Sensor (registration) on jam (tray 4
Go to
media feed)" on page 2-18.
The sensor (pre-feed) is not turned on within the
specified time after the tray 4 feed lift motor is turned on.
"244.04 Sensor (pre-feed) on jam (tray 4 media
Go to
feed)" on page 2-20.
7500-XXX
2-3
Diagnostic information