2X 500-sheet drawer (2TM)—media feed unit assembly removal (tray 4)
1.
Remove tray 4.
2.
Open the 2TM/TTM left door assembly (A).
3.
Remove one screw securing the 2TM/TTM left door support strap (B).
4.
Remove the plastic bosses on both ends of the vertical turn guide (C).
5.
Remove the vertical turn guide (C).
Boss
6.
Release the harness from the clamp.
7.
Disconnect the connector from the machine.
8.
Remove the two screws securing the media feed unit assembly (D).
9.
Remove the media feed unit assembly (D) in the direction of the arrow.
Connector
D
C
A
Harness
Clamp
D
A
Left
Boss
7500-XXX
B
Left
Repair information
4-11