Hcf Sensor (Pre-Feed) Removal - Lexmark X850e Service Manual

HCF sensor (pre-feed) removal

1.
Open the HCF top door.
2.
Open the HCF feed unit assembly.
3.
Remove the three screws securing the upper guide (A) to the HCF feed unit assembly (B).
4.
Remove the upper guide (A).
5.
Remove the connector from the sensor (pre-feed) (C).
6.
Remove the one screw securing the sensor (pre-feed) (C) to the HCF feed unit assembly (B).
7.
Remove sensor (pre-feed) (C).
A
C
Connector
B
Repair information
7500-XXX
4-63