Lexmark X850e Service Manual page 72

7500-XXX
Error code or
message
244.05
Paper jam
Check areas C,
tray 4
34
Incorrect media
Check tray 3
guides
34
Incorrect media
Check tray 4
guides
943.00
Service tray 3
failure
944.00
Service tray 4
failure
980.00
Service tray 3
comm.
Check tray 3
guides
Check tray 3
or
Check tray 4
guides
Check tray 4
guides
Close door C
Load tray 3
or
Load tray 4 with
<media>
2-4
Options Service Manual
Error contents
Sensor (tray 4 feed-out) static
jam
Tray 3 media size mismatch in
length
Tray 4 media size mismatch in
length
Tray 3 lift up / no tray failure
Tray 4 lift up / no tray failure
2TM/TTM controller card
assembly communication
failure
Tray 3 media size failure
Media size mismatch in width
Tray 4 media size failure
2TM/TTM left door assembly
open.
No media in the select media
tray
Description/Action
Media remains on the sensor (tray 4 feed-out).
Go to "244.05 Sensor (tray 4 feed-out) static jam" on
page 2-22.
The media length detected by the sensor (registration)
after the media is fed from tray 3 does not match the
length detected by the tray 3 switch (media size).
"Tray 3 media size mismatch in length" on
Go to
page 2-31.
The media length detected by the sensor (registration)
after the media is fed from tray 4 does not match the
length detected by the tray 4 switch (media size).
Go to "Tray 4 media size mismatch in length" on
page 2-33.
The tray 3 sensor (media level) is not turned on within
the specified time after the feed lift motor is turned on.
The 2TM-tray 3 switch (media size) detected no tray.
Go to "943.00 Tray 3 lift up / no tray failure" on
page 2-23.
The tray 4 sensor (media level) is not turned on within
the specified time after the feed lift motor is turned on.
The 2TM-tray 4 switch (media size) detected no tray.
Go to "944.00 Tray 4 lift up / no tray failure" on
page 2-24.
A communication error occurred between the printer
engine card assembly and the 2TM/TTM controller card
assembly.
"980.00 2TM/TTM controller card assembly
Go to
communication failure" on page
Although the tray 3 is set in the 2TM, the media size is
not detected properly.
"Tray 3 media size failure" on page
Go to
The media width is incorrect.
"Media size mismatch in width" on page
Go to
Although the tray 4 is set in the 2TM, the media size is
not detected properly.
"Tray 4 media size failure" on page
Go to
The 2TM/TTM left door is open.
"2TM/TTM left door assembly open" on
Go to
page 2-28.
Media is not loaded in the tray.
Go to "No media in the select media tray" on
page 2-29.
2-26.
2-26.
2-30.
2-27.